Email updates

Keep up to date with the latest news and content from Genome Biology and BioMed Central.

Open Access Research

Origin of nascent lineages and the mechanisms used to prime second-strand DNA synthesis in the R1 and R2 retrotransposons of Drosophila

Deborah E Stage and Thomas H Eickbush*

Author Affiliations

Biology Department, University of Rochester, 213 Hutchison, Rochester NY, 14627-0211, USA

For all author emails, please log on.

Genome Biology 2009, 10:R49  doi:10.1186/gb-2009-10-5-r49

The electronic version of this article is the complete one and can be found online at: http://genomebiology.com/2009/10/5/R49


Received:27 January 2009
Revisions received:27 March 2009
Accepted:5 May 2009
Published:5 May 2009

© 2009 Stage and Eickbush; licensee BioMed Central Ltd.

This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Background

Most arthropods contain R1 and R2 retrotransposons that specifically insert into the 28S rRNA genes. Here, the sequencing reads from 12 Drosophila genomes have been used to address two questions concerning these elements. First, to what extent is the evolution of these elements subject to the concerted evolution process that is responsible for sequence homogeneity among the different copies of rRNA genes? Second, how precise are the target DNA cleavages and priming of DNA synthesis used by these elements?

Results

Most copies of R1 and R2 in each species were found to exhibit less than 0.2% sequence divergence. However, in many species evidence was obtained for the formation of distinct sublineages of elements, particularly in the case of R1. Analysis of the hundreds of R1 and R2 junctions with the 28S gene revealed that cleavage of the first DNA strand was precise both in location and the priming of reverse transcription. Cleavage of the second DNA strand was less precise within a species, differed between species, and gave rise to variable priming mechanisms for second strand synthesis.

Conclusions

These findings suggest that the high sequence identity amongst R1 and R2 copies is because all copies are relatively new. However, each active element generates its own independent lineage that can eventually populate the locus. Independent lineages occur more often with R1, possibly because these elements contain their own promoter. Finally, both R1 and R2 use imprecise, rapidly evolving mechanisms to cleave the second strand and prime second strand synthesis.

Background

Transposable elements (TEs) are ubiquitous components and extensive manipulators of eukaryotic genomes. Because TEs constitute a significant mutation source and their remnants often comprise the majority of genomes, they are usually regarded as genomic parasites that are occasionally co-opted for host benefits [1,2]. While tracing the evolution of any genome should include a description of the natural history of its transposable elements, the diversity of TEs and their histories are so extensive that even with the advent of genome sequencing and assembly it remains challenging to follow the interplay between TEs and their host.

The rRNA genes provide a microcosm within the genome that is amenable to a detailed description of the interactions between TEs and their host. In eukaryotes these genes are organized into one or more loci, the rDNA loci, containing hundreds to thousands of copies of the 18S, 5.8S and 28S genes (Figure 1) [3]. A number of TEs specifically insert into the 28S genes of different animals [4]. The most extensively studied of these elements are the non-long terminal repeat (non-LTR) retrotransposable elements R1 and R2 of arthropods [5]. These two elements appear to have been inserting in the 28S genes of most arthropods since the origin of this phylum [6,7]. R2 elements have also been identified in a variety of other animal lineages [8,9]. The retrotransposition mechanism of R2 elements has been studied in detail [10,11]. The current model for their integration, called target primed reverse transcription (TPRT), has four basic steps: first, the bottom DNA strand of the target site is cleaved; second, the released 3' hydroxyl is used to prime cDNA synthesis by the element's reverse transcriptase; third, the top DNA strand is cleaved; and fourth, the released 3' hydroxyl is used to prime second-strand DNA synthesis [11]. This basic mechanism is likely used by R1 [12,13] and most other non-LTR retrotransposons [14].

thumbnailFigure 1. The rDNA loci of Drosophila species. Each rDNA transcription unit (diagramed in detail) consists of the 18S, 5.8S, 2S and 28S genes, the external transcribed spacer (ETS) and internal transcribed spacers (ITS1, ITS2a and ITS2). The location of the R1 and R2 insertion sites are indicated with arrowheads. Transcription units are separated by an internally repetitive intergenic spacer (IGS). The rDNA loci are usually, but not always, located on the X and Y chromosomes and typically contain hundreds of copies of the rDNA unit arranged in tandem arrays.

Evolution of the rDNA locus is known to be dominated by concerted evolution, a recombinational process involving unequal crossovers and gene conversions that maintain near identity among repeats within a species while allowing those repeats to diverge between species [15]. Abundant evidence corroborates the extremely low sequence variation present among the many copies of the rDNA unit [16-18]. Sequence variants present at the lowest frequencies are equally distributed between the coding and non-coding regions of the unit. In contrast, the rare variants present at higher frequencies are greatly enriched in non-coding regions, indicating that selective pressures guide the extent of standing variation within the locus [18].

In arthropods from a few percent to over 50% of the rDNA units are inserted by R1 or R2 elements [19], and those units are thus prevented from producing functional 28S rRNA [20]. Within a species these many copies of R1 and R2 elements also exhibit low levels of sequence variation [21]. Surprisingly, divergent lineages of R1 or R2 are frequently found in a species, which cannot be explained by horizontal transfers between species [22]. This suggests that divergent lineages of elements must be able to form within a species.

The rDNA locus is not assembled as part of genome projects because of the highly repetitive nature of the rDNA locus. Thus, in this report we used the original sequencing reads generated from the 12 Drosophila genomes project [23] to address specific questions concerning the evolution and mechanism of integration of R1 and R2 elements. Can different lineages of R1 and R2 arise within a species despite concerted evolution maintaining sequence homogeneity among the rRNA genes? What is the location of second-strand DNA cleavage? How is this site used to prime second-strand synthesis in the retrotransposition reaction?

Results and discussion

The phylogenetic relationships among the 12 Drosophila species used in this report are shown in Figure 2a. This phylogeny, based on the complete sequences of the18S and 28S genes, is consistent with the species relationships obtained with many other gene sequences [23]. In eight of the Drosophila species a complete R2 element could be assembled (Figure 2b; Additional data files 1, 2, 3, 4, 5, 6, 7 and 8). The structure of these elements conformed to previously identified R2 elements [24] and dN/dS analysis indicated that the assembled R2 elements had undergone purifying selection (mean dN/dS = 0.24 with a standard deviation of 0.321). In a ninth species, D. mojavensis, R2 sequences were identified but too few copies existed to assemble a complete sequence. R2 elements have been previously documented in several species groups of the Drosophila subgenus [25]; however, our failure to detect R2 sequences in D. virilis and D. grimshawi suggests R2 elements are frequently lost from this subgenus. The only example of R2 loss in the Sophophora subgenus, D. erecta, had been previously noted [26].

thumbnailFigure 2. Phylogenetic relationships among the 12 sequenced Drosophila species and structures of R1 and R2 elements. (a) Phylogenetic relationships of the species based on maximum likelihood trees of their consensus 18S and 28S rRNA gene sequences. (b) Structures of the R1 and R2 elements found in each species. The 'A' and 'B' designations refer to the two divergent R1 lineages that are present among Drosophila species [28]. Filled rectangles correspond to the 5' and 3' untranslated regions (UTRs). Open rectangles correspond to the open reading frames (ORFs). R1 elements have two overlapping ORFs in different frames. D. mojavensis contains R2 elements but a complete sequence could not be assembled. No trace of R2 elements could be identified in D. erecta, D. virilis and D. grimshawi.

We also searched in all species for R2 copies that might be present outside the rDNA locus. We found no extra-rDNA R2 copies in D. melanogaster, as previously reported [27], or in D. ananassae or D. persimilis. D. pseudoobscura, D. sechellia, D. simulans, D. willistoni, and D. yakuba each had R2 copies not inserted in a 28S gene. These copies were frequently incomplete and all contained sequences that were from 1% to 2% divergent from those R2 copies within the rDNA locus. Thus, these non-rDNA copies of R2 could not have given rise to the current populations of R2 insertions in the rDNA locus. Finally, in D. simulans a fusion of the 5' end of an R1 element with the 3' end of an R2 element was identified as a tandem array outside the rDNA locus.

Complete R1 elements were assembled in all 12 sequenced genomes (Figure 2b; Additional data files 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 and 21). The coding capacity of all R1 ORFs was consistent with previously characterized R1 elements [24]. A test of selection by dN/dS analysis indicated that the assembled R1 elements had undergone purifying selection (R1A, mean dN/dS = 0.30 with standard deviation of 0.376; R1B, mean dN/dS = 0.27 with standard deviation of 0.348). Previous analyses of R1 elements in Drosophila have suggested there are two distinct lineages of elements, A and B, that separated well before the origin of this genus and are differentially retained in the various species lineages [28]. Eleven of the sequenced Drosophila species contained a single R1 family of either the R1A or R1B lineage, while D. ananassae contained both lineages (Figure 2b). The only consistent difference in structure between the two lineages was that the two ORFs in the R1A lineage overlapped by 7 bp with a corresponding frame shift of -2, while the ORFs in the R1B lineage had a frameshift of -1 and overlapped from 14 bp in D. ananassae to 59 bp in D. grimshawi. As will be described below, in most species multiple examples were also identified of R1 insertions in non-28S gene locations.

R1 and R2 intraspecies sequence variation

The average levels of sequence variation among the elements within each species are shown in Table 1. Because R1 insertions were found in genomic locations outside the 28S gene, we focused our analysis on the first and last 400 bp of each element and 100 bp of their flanking sequence to insure that all sequences were derived from copies located in the 28S rRNA genes. Except in the specific examples described below, the R1 and R2 elements in each species were extremely uniform, averaging less than 0.2% divergence from the consensus sequence. Because R2 elements are seldom present outside the locus, we also monitored nucleotide variation within internal regions of R2 elements in some species. Sequence divergence for central, coding regions of R2 were estimated at less than 0.1%, similar to or slightly lower than the 5' and 3' untranslated regions (UTRs; not shown).

Table 1. Variation in the 5' and 3' ends of R1 and R2 elements

In Figure 3 the level of nucleotide variation for the 5' and 3' ends of R1 and R2 shown in Table 1 are compared to the levels of nucleotide variation previously found in the 28S genes and internal transcribed spacer (ITS)1 regions of the rDNA units [18]. The levels of variation present in R1 and R2 were much higher than that of the 28S gene, and similar to that of the ITS1 region. We have previously shown that the level of nucleotide variation for different regions of the rDNA unit was proportional to the rate at which each region diverged between species [18]. This correlation is expected if all regions of the transcribed rDNA unit undergo similar levels of concerted evolution, because increased selective constraints on a sequence removes more variants that arise by mutation, which in turn enables fewer neutral variants to become fixed in all rDNA units (diverge over time). Also shown in Figure 3 (gray bars) are the nucleotide divergence rates of R1 and R2 compared to those for the 28S gene and the ITS1 region. These divergence rates were determined by comparing the consensus sequences of each region from D. melanogaster, D. sechellia, D. simulans and D. yakuba. The relationship between the levels of variation within a species and divergence rates between species that was observed for regions of the rDNA unit was not observed for the R1 and R2 sequences. For example, the 5' end of R1 evolved at four times the rate of the R1 3' end, yet had similar levels of nucleotide variation. The 5' and 3' ends of R2 evolved at one-half the rate of the ITS1 sequences, yet had two to four times the level of nucleotide variation within a species. In this latter example, the slower rate of divergence suggests that the R2 sequences are under greater selective pressure than the ITS1 sequences. Therefore, the finding that the R2 sequences have greater levels of variation suggests that they are not undergoing concerted evolution as effectively as the ITS1 sequences.

thumbnailFigure 3. Average level of within-species sequence variation for R1 and R2. Sequence variation in the 400 bp at the 5' and 3' ends of the R1 and R2 elements from the 12 Drosophila species, the entire 28S rRNA gene and the internal transcribed spacer (ITS)1 region are shown (black bars). All values are calculated as the divergence from the consensus sequence for the species. Grey bars indicate the rates of nucleotide divergence (percent divergence per million years (myr)) of these same regions. Standard deviations are given for all values. The high standard deviation of the R1 5' end is a result of several species with no variation. The divergence data estimates were derived from comparison of the consensus sequences from D. simulans, D. sechellia, D. melanogaster and D. yakuba (divergence times: simulans versus sechellia, 0.25 myr; simulans or sechellia versus melanogaster, 3 myr; simulans, sechellia or melanogaster versus yakuba, 8 myr). Nucleotide variation data for 28S and ITS1 regions are derived from Supplemental Table 2 of [18].

Nascent subfamilies of R1 and R2

In addition to the many highly uniform copies of R1 and R2, five Drosophila species had one or more copies of R1 or R2 with nucleotide divergence of 1% to 7% from the consensus, clearly outside the range of divergences seen for the remaining R1 and R2 copies. The number and level of divergence of these atypical copies are listed in Table 1. Among these copies two had premature stop codons, indicating that they were inactive, while the remaining copies appeared to have intact ORFs. Because most divergent copies were not inserted into 28S genes that were also divergent, these R1 and R2 copies could represent distinct retrotranspositionally competent lineages of elements. However, the number of trace reads suggested these divergent R1s and R2s were at single copy levels, and thus it was likely that they had not recently been active.

Stronger evidence for the formation of nascent subfamilies was found in the examples of distinct 5' ends for the R1 elements of three species ('Variant 5' ends' column in Table 1). In D. simulans there were five distinct sequence classes of R1 5' ends, with each class representing from 11% to 26% of the total number of copies. There was no nucleotide divergence within each class, while divergence between classes ranged from 1% to 3%. In the case of D. pseudoobscura there were two distinct 5' ends. One-third of the R1 copies had 5' ends with over 4% nucleotide divergence from the remaining two-thirds of the R1 copies. Finally, R1 elements in D. ananassae showed the greatest tendency to diverge into subclasses with distinct 5' ends. The R1A elements could be separated into two classes that differed by 10% in nucleotide sequence, while the R1B elements could be separated into four classes that differed by 15% to 22% in sequence.

The separate lineages of the R1 5' ends observed in these three species were not apparent at the 3' ends of the R1 elements (that is, there was one class of 3' ends with mean levels of divergence less than 0.2%). Previous authors have suggested that new sublineages of transposable elements can arise within the same species by the acquisition of new promoter sequences [29,30]. Thus, one possibility is that the different 5' ends of R1 elements in a species correspond to rapidly evolving promoter sequences. R1 elements have been suggested to contain their own promoters because in some insect lineages R1 inserts in the opposite orientation in the 28S gene, or even outside the rDNA locus [9,31]. R2 elements on the other hand appear to be co-transcribed with the 28S gene and thus do not have their own promoter [32,33]. No evidence of divergent 5' ends was found for the R2 elements of any Drosophila species.

Finally, Figure 4 summarizes two examples where the formation of nascent families involves sequence divergence of the entire R1 and R2 elements. In D. grimshawi two equally represented groups of R1B elements were detected that had 21% nucleotide divergence at their 5' ends and lower levels in other regions of the element (Figure 4a; Additional data files 12 and 22). The level of divergence for most regions of the two families was less than the divergence between the R1 elements of D. melanogaster and D. simulans, also shown in Figure 4a, suggesting the two R1B subfamilies in D. grimshawi are not as old as the estimated 3 million year separation between D. melanogaster and D. simulans [34]. The 5' ends of the subfamilies have undergone accelerated rates of divergence, similar to that described for the different 5' ends of R1 elements in D. ananassae, D. simulans and D. pseudoobscura (Table 1).

thumbnailFigure 4. Summary of the nascent lineages of R1 and R2 in two species. In both panels the elements are diagramed as in Figure 2b. Values below the element diagrams are nucleotide divergences, while values above the diagrams are amino acid (aa) divergences. (a) Nascent lineages of R1 elements in D. grimshawi. For comparison, the relative level of sequence divergence between the R1 elements of D. melanogaster and D. simulans are also shown. The estimated time of separation of these two species is 3 million years [34]. (b) Nascent lineages of R2 elements in D. willistoni. The divergence between the R2 elements of D. melanogaster and D. simulans are shown.

A second example of the presence of subfamilies within a species was found for the R2 elements in D. willistoni. In this case one subfamily, R2.1, was highly abundant while the R2.2 subfamily (Additional data file 23) was present in only a few copies. As shown in Figure 4b the subfamilies have diverged by 4.7% in their 5' UTRs and 3.6% in their 3' UTRs, similar to the divergence between the R2 elements of D. melanogaster and D. simulans. The amino acid divergence of the ORF from the two subfamilies (2.6%) was also similar to the divergence between D. simulans and D. melanogaster (2.4%), suggesting the divergence time between the D. willistoni subfamilies is similar to the time of divergence of D. melanogaster and D. simulans.

Unequal crossover events occurring within R1 (or R2) elements would homogenize their sequences, thus preventing the separation of two distinct lineages. Because the nucleotide divergence for most of the region encoding ORF2 of the R1B.1 and R1B.2 elements in D. grimshawi was less than 1%, and thus could still undergo recombination, we looked for evidence of such events. Blast searches were conducted using a query from the end of each subfamily. We then examined the sequence trace from the other end of each approximately 3.5 kb plasmid to determine whether it contained sequence from the same or opposite subfamily. Of 115 informative plasmid ends examined, only one pair indicated recombination between the subfamilies. This paucity of recombination can explain how these nascent subfamilies are able to avoid concerted evolution and remain independent lineages.

Mechanism of R2 retrotransposition

Analysis of R2 junctions

As shown in Figure 5a, when viewed from their 3' junctions with the 28S gene, all R2 copies present in the sequenced Drosophila genomes were inserted into the same site as previously characterized R2 elements in all animals [5,35]. This location corresponds to the site of bottom strand DNA cleavage by the R2 endonuclease from Bombyx mori (Figure 5c). This cleavage site serves as the primer for reverse transcription of the element RNA [10]. For about 1% of the R2 insertions identified in the Drosophila genomes, bottom-strand cleavage appears to have occurred 1 or 2 bp downstream of this usual site. The uncertainty in cleavage location is because the second nucleotide downstream of the typical cleavage site is an 'A' and all Drosophila R2s end in a variable length poly-A tail (Figure 5a).

thumbnailFigure 5. Junction sequences of the R2 elements with the 28S gene. (a) 3' junction sequences. All Drosophila R2 elements contain 3' poly(A) tails. Most R2 insertions are consistent with the location of the R2 DNA cleavage sites on the bottom strand (see panel (c)) and its use in priming reverse transcription. (b) Representative examples of the 5' junctions of R2 elements with the 28S gene. All full-length examples are from D. melanogaster. R2 sequences are boxed, 28S sequences are in bold, non-templated sequences are in plain text, and duplications of 28S sequences are underlined. Boxed residues shaded grey correspond to microhomologies: sequences that could correspond to either the 28S sequence or the R2 element. (c) Location of the probable cleavage sites on the 28S gene. Arrows show cleavage locations determined in vitro for the R2 endonuclease from B. mori [10]; the arrow head topped by '0' shows the location of the top-strand cleavage site inferred after analysis of the Drosophila R2 5' junctions. The bottom diagram shows a hypothetical intermediate in the integration reaction after first-strand synthesis (boxed nucleotides) and second strand cleavage. The terminal two nucleotides of the cDNA are proposed to anneal to the top strand of the cleaved target site. This microhomology allows precise priming of second-strand DNA synthesis and the generation of the precise junctions seen in example a in panel (b).

In vitro studies with the B. mori R2 endonuclease suggested the location of top-strand cleavage occurred 2 bp upstream of the bottom-strand site (Figure 5c) [10]. Previous analyses of a few R2 5' junctions from each of several Drosophila species, as well as other insect species, were interpreted in a manner that was consistent with such a cleavage [36,37]. However, there is significant variation at the 5' junctions of R2 elements, and the comprehensive analysis of this variation made possible using the genomic sequences suggested a reevaluation of this second-strand cleavage location was needed.

Similar to most non-LTR retrotransposons, R2 insertions can be full-length or contain truncations of their 5' ends. The 5' truncations have been suggested to be due to the failure of the reverse transcriptase to copy the entire RNA template, degradation of the RNA template, or the initiation of second-strand synthesis before reverse transcription is completed [5]. Figure 5b shows representative examples of full-length and 5'-truncated R2 elements. All full-length examples are from D. melanogaster but are representative of the R2 elements observed in all Drosophila species. Almost two-thirds of the full-length insertions have 5' junctions that include the 28S sequence to the position across from the site of bottom-strand cleavage, position '0' (examples a, d and e), with the remaining third containing variable deletions of the upstream 28S sequence (examples b and c). Many junctions contain additional bases at the junction. In some cases the additional bases represented duplications of the 28S gene (example e), while for other junctions the origin of the additional bases could not be identified, here called non-templated bases (example d). In the case of the 5' truncated elements most junctions contain from one to five bases at the precise 28S/R2 junction that may be assigned to either 28S or R2 (examples of these microhomologies are indicated by the shaded bases in Figure 5). R2 5' truncated junctions can also be associated with deletions of upstream 28S sequences (examples g and h), and non-templated additions (example i).

Figure 6 is an attempt to summarize the 5' junction data for the R2 copies in several species. Plotted in these figures is the last contiguous nucleotide of the 28S gene found for each R2 insertion. For most full-length copies the last 28S nucleotide corresponded to the position opposite the bottom-strand cleavage site (Figures 5c and 6a). In the case of the 5' truncated R2 elements (Figure 6b), more copies are associated with deletions of 28S sequences, but again the most frequent final base of the 28S gene is opposite bottom-strand cleavage.

thumbnailFigure 6. Probable top-strand cleavage sites for the R2 element insertions. Dots indicate for all R2 elements the last nucleotide at the 5' junction that corresponds to the upstream 28S sequence. In instances where multiple copies of an element within a species had identical junctions, the number of genomic copies was estimated by dividing the number of traces by the fold coverage of the genome sequencing project. Arrows show the location of the insertion site (bottom-strand cleavage used for TPRT). The data were obtained from the following species: D. ananassae, D. melanogaster, D. pseudoobscura, D. sechellia, D. simulans and D. yakuba. (a) Full-length R2 elements. (b) 5' truncated R2 elements.

R2 retrotransposition model

This analysis of the 5' junctions of R2 insertions supports the following additions to the TPRT model for R2 retrotransposition. First, the most frequently used top-strand cleavage site in Drosophila is directly opposite the bottom-strand site, rather than 2 bp upstream (position -2) as suggested from the in vitro studies with the R2 endonuclease from B. mori [10]. Cleavage opposite the bottom-strand site readily explains junctions such as examples d, e and i in Figure 5b, junctions difficult to explain if top-strand cleavage was at position -2. Second, we suggest that full-length R2 RNA transcripts in Drosophila contain G residues at their 5' end. All integrated full-length R2 copies in D. melanogaster begin with four G residues (examples a to e in Figure 5b), and similar analysis of the other Drosophila species indicated that the full-length R2 elements in these species contained at least two terminal G residues (data not shown). No conservation of R2 5' end sequences is found beyond these two Gs.

To explain the most frequently observed R2 full length junctions (example a in Figure 5b), we suggest that two terminal C residues on the cDNA strand made from the R2 transcript anneal to the cleaved target site (see Figure 5c for a diagram). A tendency to anneal a few nucleotides of the cDNA strand to the top strand of the target DNA before initiating second-strand DNA synthesis would explain the frequent 'microhomologies' between internal R2 sequences and upstream 28S sequences that are found associated with 5' truncated R2 insertions. The non-templated nucleotides found at the 5' junctions of full-length and truncated copies of R2 are suggested to result when the annealing of microhomologies does not occur. In vitro studies have shown that the R2 polymerase adds non-templated nucleotides before initiating from a primer that is not annealed to the template [38], as well as when it 'runs-off' the end of a template [39]. These non-templated nucleotides can be of any sequence and thus could also lead to microhomologies used to initiate polymerization of the top DNA strand. Microhomologies between these non-templated nucleotides and the 28S gene would go undetected by our analysis. Finally, the R2 junctions with deletions of the 28S gene, as well as the few with duplications of the 28S gene, could represent top-strand cleavages outside the preferred site.

Mechanism of R1 retrotransposition

R1 junction sequences

Based on their 3' junctions with the 28S gene, all R1 elements within the 28S gene are located 60 bp downstream of the R2 insertion site. In vitro studies with the B. mori R1 endonuclease suggest this site corresponds to the location of the bottom-strand DNA cleavage site used to prime a TPRT reaction [12,13]. As in the case of R2, the 5' ends of both full-length and truncated R1 copies showed significant variation (Figure 7).

thumbnailFigure 7. Full length and 5' truncated junctions of the Drosophila R1 insertions. Shown at the top is the sequence of the 28S gene insertion site. Various regions of the sequence have been indicated with colors to allow the 5' and 3' junctions of the R1 insertions to be summarized. Position +1 corresponds to the position of bottom-strand cleavage based on the 3' junctions of all R1 elements as well as from in vitro studies of the R1 endonuclease [12,13]. Positions -9 and +14 correspond to the inferred most frequent sites of top-strand cleavage. Shown at the bottom are diagrams of the 5' and 3' junctions of R1 insertions. Full-length as well as 5' truncated insertions of the ancestral type R1s have 14 bp target site duplications (left side). The bracketed region of the junctions exhibited sequence variation. This variation can correspond to non-templated nucleotides (sequences corresponding to neither the 28S gene nor the R1 element), or microhomologies (1 to 5 nucleotides that could correspond to either the 28S gene or the R1 element). Melanogaster group R1s have three classes of junctions (right side): full length insertions with a precise 9 bp target site deletion; full length insertions with an insertion site rearrangement (ISR); and 5' truncated insertions. Sequence variation at these junctions is limited to the bracketed region and corresponds to the variation seen in the ancestral type R1s. The tables at the bottom show the fraction of copies observed at the bracketed site that are precise, contain non-templated nucleotides (extra nt) or microhomologies (micro).

Based on their 5' junctions the R1 elements could be divided into two groups. For R1B elements and the R1A elements outside the melanogaster species group, the upstream 28S gene sequences typically extended to a position 14 bp downstream of the bottom-strand site (+14), and thus a 14 bp target site duplication (TSD) flanks the R1 insertions (Figure 7, left side). Because similar length TSDs flank the R1 elements in most other arthropods [40,41], this group is called the 'ancestral type' R1 insertions. All sequence variation associated with the 5' junctions of both full-length and 5' truncated elements of the ancestral type were located at the end of the TSD (bracketed region in Figure 7). As with the R2 elements, these 5' junctions could be classified as precise, containing microhomologies, or containing non-templated nucleotides. Most full-length ancestral type R1 insertions were precise, with the remainder containing non-templated nucleotides. The 5' truncated ancestral R1s are more broadly distributed between precise, non-templated and microhomology junctions.

In contrast to the ancestral type R1s, many copies of the R1A elements in the melanogaster species group (D. ananassae, D. erecta, D. melanogaster, D. sechellia, D. simulans, and D. yakuba) contained upstream 28S gene sequences that extended only to position -9. The relative proportion varied from species to species, but altogether 75% of the full-length 'melanogaster-type' R1 insertions contained this 9 bp deletion. No 5' sequence variation was associated with these insertions. The remaining full-length insertions contained variable-length TSDs up to 17 bp in length and an unusual duplication of 28S sequences that we called insertion site rearrangements (ISRs). These duplications of the 28S sequence extended for 16 to 27 nucleotides upstream of position -9. Microhomologies and non-templated nucleotides were common at these junctions and were always located between the TSD and the ISR (bracketed region). The 5' truncated insertions of the melanogaster-type R1s also contained precise, non-templated and microhomology junctions.

Figure 8 is again a plot of the last contiguous nucleotide of the 28S gene found at the 5' end of the R1 elements in several species. In the case of the ancestral type R1s, the full-length and 5' truncated junctions are consistent with a top-strand cleavage at position +14. Most exceptions to this cleavage location were in D. ananassae, where R1B insertions made an 11 or 13 bp TSD, and in D. willistoni where some R1B insertions contained an 8 bp TSD. The probable locations of the top-strand cleavage for the melanogaster-type full-length R1 elements (Figure 8b) were clustered about two locations. Precise full-length insertions had top-strand cleavage at position -9. For the full-length ISR elements and the 5' truncated elements top-strand cleavages were less specific but clustered around position +14.

thumbnailFigure 8. Probable top-strand cleavage sites for the R1 element insertions. Dots indicate for all R1 elements the last nucleotide at the 5' junction that corresponds to the upstream 28S sequence. In instances where multiple copies of an element within a species had identical junctions, the number of genomic copies was estimated by dividing the number of traces by the fold coverage of the genome sequencing project. Arrows show the location of the insertion site (bottom-strand cleavage used for TPRT). The different types of junctions diagrammed in Figure 7 are given different symbols. (a) Ancestral type R1 elements. Data derived from D. ananassae A, D. mojavensis, D. pseudoobscua and D. willistoni. (b) Melanogaster-type R1 elements. Data derived from D. melanogaster, D. sechellia, D. simulans and D. yakuba.

Tandem R1 arrays

In seven of the Drosophila species R1 elements were found organized as tandem arrays (Table 2). Evaluation of the sequencing reads at the other end of clones containing tandem R1s revealed that many, and perhaps all, of these tandem R1 elements were located within the rDNA loci. These tandem arrays were located at the normal R1 insertion site with the individual R1 copies separated by the 14 bp 28S gene sequence corresponding to the typical TSD. Such R1 tandem arrays have been previously described in D. virilis [42]. Because R1 insertions were never found inserted upstream of R1 insertions without the TSD in these species, the mechanism of tandem R1 formation appears to be the insertion of additional R1 elements into the TSD present at the 5' end of R1 elements already inserted into a 28S gene. Consistent with this, melanogaster-type R1 elements have no or few tandem R1 insertions (Table 2, but see the legend). The highest levels of tandem insertions were in D. pseudoobscura and D. ananassae R1B where each R1-inserted rDNA unit contained an average of two to three R1 elements.

Table 2. Ratio of R1 elements in the canonical 28S site, tandem arrays and non-28S locations

R1 insertions into non-28S locations

In most Drosophila species copies of R1 were also identified that had inserted into sequences outside the 28S gene (Table 2). Frequent R1 insertions outside the 28S gene have also been reported in B. mori [43]. The Drosophila species with the most abundant examples of non-28S R1 insertions were D. ananassae and D. pseudoobscura, the two species with the highest levels of tandem duplications. This may suggest that R1 insertions in these species are either less specific or retrotranspose more often. We identified 118 unique examples of non-28S gene R1 insertions that had intact 3' junctions, suggesting that they represented authentic retrotransposition events, not segments of R1 sequence that had been displaced by recombination to locations outside the rDNA locus. The insertion sites for these copies frequently corresponded to repeated DNA sequences, probably in the pericentromeric or telomeric regions of the genome. An exception was in D. ananassae, where a 22 bp region of the 28S gene corresponding to the R1 28S insertion site was found in the IGS region of the rDNA unit. One R1A element and seven R1B elements were found in rDNA units containing this unusual insertion of 28S sequences within the IGS.

Because the insertions had occurred into repeated DNA sequences we were able to identify the likely target sequences for some of the R1 insertions. Figure 9 shows examples in which we were able to identify either or both 5' and 3' ends of the insertions and their likely target sequences. In all cases where both junctions were recovered (Figure 9a), the target sites contained from 4 to 9 bp of sequence identity to the 28S target site centered near the lower strand cleavage site, and the insertions generated TSDs of from 3 to 14 bp.

thumbnailFigure 9. Junction sequences and the probable target sites of R1 elements inserted outside the 28S genes. The inferred uninserted target sequence is shown at the top of each example. Boxed sequences indicate R1, bold uppercase sequences are identical to 28S sequences, and bold lower case nucleotides are non-templated nucleotides. (a) Insertion sites in which both 5' and 3' junctions of the R1 element were recovered; 2 to14 bp target site duplications were created by the insertions and are delineated by vertical dotted lines. (b) Insertion sites in which only the 5' junction with R1 was recovered. (c) Insertion sites in which only the 3' junction with R1 was recovered. Junctions come from the following species: D. pseudoobscura, examples 1, 4 and 11; D. mojavensis, example 2; D. persimilis, examples 3 and 12; D. sechellia, examples 5, 8, 9 and 10; D. yakuba, example 6; D. ananassae A, example 7; D. virilis, example 13. M, melanogaster-type R1 elements; A, ancestral type R1 elements.

The 5' junctions of all melanogaster-type full length R1s outside the rDNA array contained upstream 28S gene sequences ending at position -9 and extending upstream for 7 to 28 bp (Figure 9, examples 5 to 10). The 5' ends of the ancestral type R1 insertions showed no evidence for the insertion of flanking 28S rRNA sequence (examples 1 to 4 and 11). The 3' junctions of both the ancestral and melanogaster-type R1s were similar, with most beginning at the precise 3' junction of the R1. However, some insertions showed the incorporation of up to 14 nucleotides of downstream 28S sequences (example 13) or the presence of non-templated nucleotides (example 12).

R1 retotransposition model

The analysis of the R1 5' junctions with the 28S genes, as well as the insertions into non-28S gene locations, enables us to propose several steps involved in the R1 retrotransposition reaction. These suggestions are based on the standard TPRT mechanism of R2 and other non-LTR retrotransposons and the ability of their polymerases to add non-templated nucleotides at the ends of synthesized DNA strands. First, because no variation was detected within a species or between species for the location of the bottom-strand cleavage used to prime reverse transcription, like R2, this is the most conserved step in the retrotransposition reaction of R1. The analysis of R1 insertions outside the 28S gene site revealed that downstream 28S gene sequences are sometimes also inserted with the R1 element. In addition, many of these non-28S gene target sites contain bases corresponding to the 28S gene (examples 1 to 6 in Figure 9). Together these data suggest that the 3' end of the R1 transcript used for retrotransposition often contains flanking 28S sequences. These flanking 28S sequences may anneal to the bottom strand of the target site and thus account for why there is little sequence variation associated with the 3' junctions of R1.

For all ancestral type R1s, top strand DNA cleavage is predominantly located 14 bp downstream of the bottom-strand cleavage. This top-strand cleavage location, among others, was also detected for the R1 endonuclease of B. mori [12,13]. The use of this cleavage to prime second strand synthesis results in 14 bp target site duplications (Figure 10, left side). The only deviation in this 'ancestral' cleavage location appeared in D. ananassae R1B elements, which had 11 and 13 bp TSDs, and in D willistoni R1B elements where several examples of elements with 8 bp TSDs were detected. The priming of second-strand synthesis appears less precise than first-strand synthesis, sometimes involving the addition of non-templated nucleotides. This suggests that the cDNA strand does not efficiently anneal to the cleaved top strand, suggesting few if any nucleotides of upstream 28S sequence are included at the 5' end of the R1 transcript. Consistent with this suggestion, no flanking 28S sequences were associated with the ancestral-type non-28S R1 insertions.

thumbnailFigure 10. R1 retrotransposition models based on the standard target primed reverse transcription reaction. The uninserted 28S gene is shown at the top. The various regions upstream and downstream of the target site are colored as in Figure 7. Left side: ancestral type R1 transcripts (wavy line) do not contain upstream 28S gene sequences. Ancestral type R1s cleave the top DNA strand 14 bp downstream of the bottom cleavage site. Nucleotide variation at the 5' junctions corresponds to the imprecise nature by which the R1 polymerase uses the top strand of the DNA target to prime second-strand DNA synthesis. Right side: full length melanogaster-type R1 transcripts include 28S sequences starting upstream of position -9. Cleavage of the top strand occurs at one of two sites. If top-strand cleavage occurs 9 bp upstream of the bottom-strand site, then the upstream RNA sequences can anneal to the end of the cDNA strand, resulting in a precise 9 bp deletion of the target site. If top-strand cleavage occurs downstream of the bottom-strand site, then the annealing of cDNA to the target site is not possible, generating variation at the junction of the target site duplication.

R1A lineage elements in the melanogaster species group appear to have evolved changes in the TPRT reaction. In these R1s, top-strand cleavage frequently occurs 9 bp upstream of bottom-strand cleavage, resulting in a 9 bp target site deletion. Priming of second-strand synthesis from this site is highly precise, that is, non-templated sequences were never observed, suggesting 28S gene sequences are included at the 5' end of the RNA transcripts used for retrotransposition. This flanking 28S sequence allows the reverse transcribed strand to anneal to the target site (Figure 10, middle). Consistent with this suggestion, from 7 to 28 bp of flanking 28S sequences ending at position -9 are associated with the non-28S gene insertions of the melanogaster-type R1. The R1A elements in the melanogaster group also appear able to cleave the top DNA strand in a less specific manner around position +14 (Figure 8b). Such cleavages result in ISR junctions in which a typical TSD is present followed by 16 to 27 bp of the 28S gene ending at position -9 (Figure 10, right side). Considerable variation is detected in these junctions between the TSD and the duplicated upstream 28S sequences, presumably because this downstream cleavage eliminates the ability of cDNA sequences to anneal to the top strand in the initiation of second-strand synthesis. An intriguing aspect of these melanogaster-type R1 elements is that all 5' truncated insertions have TSDs (Figure 8), suggesting they can only arise from downstream cleavage of the top strand. One possibility is that the default cleavage site for the R1 endonuclease is downstream of the insertion site, but the 5' end of the full-length R1 transcripts acts as a signal directing the cleavage site to the position at -9.

Conclusions

Origin of nascent lineages

The availability of whole genome shotgun sequences has enabled us to evaluate the level of sequence variation of the R1 and R2 elements in 12 species of Drosophila. The level of nucleotide divergence for most copies was typically less than 0.2%, suggesting either the elements are subject to the same concerted evolution mechanisms that enable the rRNA genes themselves to remain nearly identical, or that the R1 and R2 elements are gained and lost rapidly from the locus (that is, all copies are recent insertions). All previous analysis suggested the latter explanation. Analyses of the 5' truncated copies of R1 and R2 in several species have suggested that these elements do turnover rapidly. Different animals from the same population were found to have different collections of 5' truncated copies [44,45] and most 5' truncated elements within an animal had not undergone duplication by recombination [46,47]. Thus, the individual copies of R1 and R2 do not appear to remain in the rDNA locus for long enough periods to be substantially influenced by the recombinations leading to the concerted evolution of the locus.

One puzzling aspect concerning the evolution of R1 and R2 was the presence of multiple families in some species, yet no evidence for the origin of these lineages by horizontal transfer [28,48]. The rapid turnover of individual R1 and R2 elements suggests that each active copy can generate its own lineage, which over time should accumulate sequence variation. Thus, while separate lineages of R1 and R2 should be able to arise, the question remained as to whether they could be maintained within a species. In this report we have for the first time detected these nascent lineages of R1 and R2 elements within a species. Two distinct subfamilies of R1B elements were detected in D. grimshawi and two distinct subfamilies of R2 elements in D. willistoni (Figure 4). In addition to these distinct lineages, other species contained individual copies of R1 or R2 that had from 1% to 7% nucleotide divergence from the majority of elements in the species. Many of these divergent copies had intact ORFs, and thus were potentially active. Another frequent finding was the presence of distinct 5' UTRs for the R1 elements (Table 1). This was most widespread in D. ananassae where the R1A elements could be divided into two groups that diverged 10% in their 5' UTR sequences, while the R1B elements could be divided into four groups with 5' UTRs that diverged from 15% to 22%. We suggest this accelerated divergence of the 5' UTRs represents the evolution of new promoter sequences driving the transcription of the elements. Once a new promoter is formed, copies containing this new promoter may differ in their expression, thus giving rise to new lineages of elements.

Similar examples of the rapid evolution of the 5' UTRs of R2s were not detected. We have previously suggested that R2 elements do not contain their own promoter but are co-transcribed with the 28S gene [32,33]. This co-transcription may make it more difficult for independent R2 lineages to evolve. A single lineage of R2 elements has been found in the Drosophila genus [25], while four distinct lineages of Drosophila R1 elements exist [28]. It is also possible that the more frequent loss of R2 from a Drosophila species (3 out of 12 species) compared to R1 (no losses among the 12 species) could also be the result of R2's reliance upon co-transcription with the rDNA units in which they reside.

Second-strand DNA synthesis

Many of the initial steps involved in the cleavage of the target site bottom strand and its use to prime reverse transcription have been characterized using purified R2 protein in vitro [10,38,49]. The recent discoveries that sequences near the 5' end of the RNA transcript regulate top-strand cleavage [11], and that the R2 polymerase can efficiently displace an RNA strand while using a DNA strand as template [50], suggest that the R2 protein also synthesizes the second DNA strand. However, many questions remain concerning whether and how top-strand cleavage of the target DNA is used to prime second-strand synthesis.

Because of an unusual template jumping ability of the R2 polymerase [39], we previously suggested that during reverse transcription the R2 polymerase jumps from the R2 transcript onto the upstream DNA target sequences [5,36,37]. The hundreds of R2 5' junctions analyzed here suggest a different model. In Drosophila we propose that the 5' ends of the R2 RNA transcripts contain terminal G residues that, after reverse transcription and top-strand cleavage, enable the terminal C residues to anneal to the G residues of the top DNA strand after cleavage (Figure 5c). This model would explain the most common full-length R2 insertions in all Drosophila species. Similarly, microhomologies between internal R2 sequences and the upstream 28S gene sequences can explain the priming of second-strand DNA synthesis in many 5' truncated R2 insertions. When annealing of microhomologies does not occur, non-templated residues can be observed that were either added during first-strand synthesis when the R2 polymerase runs off an RNA template [39] or during second-strand synthesis before the R2 polymerase engages the cDNA [38].

The only aspect of this integration model that does not agree with previous biochemical studies is the location of the top-strand cleavage site. The experiments using the B. mori R2 protein suggested this cleavage was two nucleotides upstream of the bottom-strand site [10] while our analysis of Drosophila R2 junctions suggest it is opposite the bottom-strand site (Figure 5c). We suggest this represents an evolved difference between the R2 elements in these divergent insects. We have analyzed the 5' junctions of over 40 B. mori R2 insertions and found their structure is consistent with the location of top-strand cleavage determined with the purified protein [37]. We suggest that cleavage of the top strand by the R2 endonuclease is not rigidly determined, and thus its location can vary.

Much less was previously known about the R1 retrotransposition mechanism. In vitro studies of the R1 endonuclease, again from B. mori, revealed a bottom-strand cleavage site in a position consistent with its use to prime reverse transcription [12,13]. All Drosophila R1 3' junctions, as well as 3' junctions in other insect species [19], are consistent with this cleavage site. As in the case of R2, the R1 5' junctions suggest cleavage of the top strand is less precise and subject to evolutionary changes. For many Drosophila R1 insertions top-strand cleavage was proposed to be at a site 14 bp downstream of the bottom strand, again consistent with the biochemical studies. Use of this site to prime second-strand synthesis results in a 14 bp TSD. Minor changes in this cleavage location were found in D. ananassae, where the R1B insertions have 11 or 13 bp TSDs, and in D. willistoni, where some ancestral type R1A insertions have an 8 bp TSD. Annealing of cDNA sequences to the upstream target site presumably does not occur as significant nucleotide variation is observed at the junctions.

A radical change in top-strand cleavage site preference is proposed for the R1A elements of the melanogaster species group. In these species, many R1 insertions result in a 9 bp target site deletion, suggesting cleavage frequently occurs 9 bp upstream of the bottom-strand site (Figure 10). Associated with this remarkable change in cleavage site preference also appears to be a change in the nature of the R1 RNA transcript used for retrotransposition. Based on the structure of the ISR full-length insertions and of non-28S insertions, these melanogaster-type R1 transcripts contain from 6 to 27 nucleotides of 28S sequence ending 9 bp upstream of the integration site. These upstream 28S sequences on full length R1 transcripts appear to anneal to the target site, giving rise to highly precise 5' junctions. Interestingly, these melanogaster-type R1s retain the ability to cleave downstream of the integration site, resulting in the ISRs seen in some full-length insertions and the TSDs observed for all 5' truncated insertions. Because annealing of the upstream 28S sequences is not possible with these downstream cleavage sites, significant variation is observed at these junctions. We searched for evidence of these additional 28S sequence tags among available expressed sequence tag sequences from D. melanogaster. However, all R1 sequences contained extensive upstream 28S sequences or were transcripts of R1 tandem arrays (data not shown).

Thus, the integration mechanisms used by the R1 and R2 elements are quite similar. Cleavage of the bottom strand and its use to prime first-strand DNA synthesis is rigidly determined, and no variation was observed between species. Cleavage of the top strand and its use to prime second-strand synthesis is flexible, which results in different junctions both within and between species. R1 and R2 are highly successful in the 28S niche. Whether change in the location of top-strand cleavage occurs simply because it is neutral or because it increases insertion efficiency is unclear. Nevertheless, the ability of R1 and R2 to explore the top-strand cleavage site suggests that variations of the retrotransposition mechanism can evolve among arthropods that could affect both the elements and the rDNA loci in which they reside.

Materials and methods

Species and databases

Original sequencing reads from the whole genome shotgun sequencing projects were accessed by Blast search (version 2.2.17) in the trace archives at NCBI [51]. The 12 Drosophila species and their sequencing fold coverage were: D. ananassae (9-fold), D. erecta (10-fold), D. grimshawi (8-fold), D. melanogaster (12-fold), D. mojavensis (8-fold), D. persimilis (4-fold), D. pseudoobscura (9-fold), D. sechellia (5-fold), D. simulans (4-fold; white 501 strain only), D. virilis (8-fold), D. willistoni (8.4-fold) and D. yakuba (9-fold).

Assembling R1 and R2 elements

Downstream 28S sequences flanking the known R1 and R2 insertion sites were used as Blast queries using default parameters except for requesting the maximum of 20,000 target sequences. The reads were collected, trimmed upstream of the query and aligned in ClustalX [52]. Those sequences upstream of the query that were not 28S rRNA sequences were considered putative R1 or R2 elements and were used as Blast queries in the nucleotide collection database (nr/nt) and VecScreen at NCBI [51]. Some putative elements were identified as cloning vector sequence and disregarded. For the remaining majority of sequences, 5' extensions of the sequences were assembled by Blast search, followed by alignment and extraction of a consensus. Iterations were done until the 5' junction of the element with the 28S was reached. Full assemblies were not possible in a few instances because of low element copy number and low coverage of some genome sequences.

Phylogenetics

Alignments of concatenated 18S and 28S sequences (from Stage and Eickbush [18] and available at the Eickbush lab website [53]) were done in ClustalX [52] with minor manipulations done in Jalview [54]. Default parameters of phyML version 3.0 [55] as implemented through the LIRMM website [56,57] were used to construct maximum likelihood trees and visualized using TreeDyn 198 [58]. Branch support values were the minimum score based on Shimodaira-Hasegawa-like and Chi2-based approximate likelihood-ratio tests [59].

Nucleotide variation in the 5' and 3' ends of elements and sequence divergence between species

Blast queries were 75 bp long near the 5' or 3' end of each consensus R1 or R2 sequence; default Blast parameters were used except for requesting the maximum of 20,000 target sequences and using a match/mismatch score of 1,-1. The Blast results were trimmed to include 400 bp of the element and 100 bp of flanking sequence. Retention of the flanking sequence enabled those elements present in the 28S gene to be separated from those copies inserted elsewhere in the genome. ClustalX alignment [52] of results from each Blast search was conducted and groups of like sequences were extracted and consensus sequences derived. Quality scores for reads containing differences from the main consensus were examined to verify that the variation observed was not sequencing error (scores less than 40 were considered sequencing error). The Sequence Manipulation Suite: Ident and Sim [60] aided determination of the percent identity of the variants relative to the consensus.

In theory it should be possible to make copy number estimates based on the genome sequence coverage and the number of trace reads recovered. In practice, however, random variation in fold coverage for any given sequence means only an estimate of copy number for repetitive sequences can be inferred. In addition, rDNA loci in many species of Drosophila are located on the X and Y chromosomes, resulting in different sequencing coverage. Finally, by requiring analyzed reads to cover 400 bp to enable a significant and uniform level of information to be recovered from each read, fewer reads were obtained for each analysis. Thus, estimates of element abundance were made relative to the number of rDNA units also recovered in the trace archives (that is, fraction of rDNA units inserted). Copies with small numbers of reads (approximately 2 to 12) and identical sequence variation were interpreted as single elements.

Insertions outside the 28S genes

Using the 5' and 3' ends of R1 and R2 elements as Blast queries and analyzing the flanking sequences, we found many examples of R1 elements inserted outside the usual 28S site. Identification of the non-28S sequences was attempted by comparing them to our assembled rDNA-related sequences and by Blast search of the NCBI non-redundant nucleotide database [51]. While a few target sites could be identified, the majority of sequences had not been characterized and represented repeated sequences, and thus were presumed to be heterochromatic. We then attempted to find uninserted copies of the sequences using the flanking sequences as Blast queries. In those cases where the target site was repeated, we could identify examples of uninserted target sites, and in some instances the opposite junction of the R1 insertion.

dN/dS analysis

Selection analysis was done using the HyPhy package available at Datamonkey [61]. We conducted all the available tests and report here the dN/dS results of the PARRIS test [62], which were similar in all the tests.

Abbreviations

ISR: insertion site rearrangement; ITS: internal transcribed spacer; LTR: long terminal repeat; ORF: open reading frame; rDNA loci: loci encoding the tandem array of rRNA genes; TE: transposable element; TPRT: target primed reverse transcription; TSD: target site duplication; UTR: untranslated region.

Authors' contributions

DS participated in the design, carried out all the experiments and drafted the manuscript. TE participated in the design and helped with the manuscript. Both authors read and approved the final manuscript.

Additional data files

The following additional data are available with the online version of this paper. Each file contains the consensus nucleotide sequence for an R1 or R2 element: Drosophila ananassae R2 (Additional data file 1); Drosophila melanogaster R2 (Additional data file 2); Drosophila persimilis R2 (Additional data file 3); Drosophila pseudoobscura R2 (Additional data file 4); Drosophila sechellia R2 (Additional data file 5); Drosophila simulans R2 (Additional data file 6); Drosophila willistoni R2.1 (Additional data file 7); Drosophila yakuba R2 (Additional data file 8); Drosophila ananassae R1A (Additional data file 9); Drosophila ananassae R1B (Additional data file 10); Drosophila erecta R1 (Additional data file 11); Drosophila grimshawi R1.1 (Additional data file 12); Drosophila mojavensis R1 (Additional data file 13); Drosophila melanogaster R1 (Additional data file 14); Drosophila persimilis R1 (Additional data file 15); Drosophila pseudoobscura R1 (Additional data file 16); Drosophila sechellia R1 (Additional data file 17); Drosophila simulans R1 (Additional data file 18); Drosophila virilis R1 (Additional data file 19); Drosophila willistoni R1 (Additional data file 20); Drosophila yakuba R1 (Additional data file 21); Drosophila grimshawi R1.2 (Additional data file 22); Drosophila willistoni R2.2 (Additional data file 23).

Additional data file 1. Drosophila ananassae R2 complete consensus sequence.

Format: TXT Size: 4KB Download fileOpen Data

Additional data file 2. Drosophila melanogaster R2 complete consensus sequence.

Format: TXT Size: 4KB Download fileOpen Data

Additional data file 3. Drosophila persimilis R2 complete consensus sequence.

Format: TXT Size: 4KB Download fileOpen Data

Additional data file 4. Drosophila pseudoobscura R2 complete consensus sequence.

Format: TXT Size: 4KB Download fileOpen Data

Additional data file 5. Drosophila sechellia R2 complete consensus sequence.

Format: TXT Size: 4KB Download fileOpen Data

Additional data file 6. Drosophila simulans R2 complete consensus sequence.

Format: TXT Size: 4KB Download fileOpen Data

Additional data file 7. Drosophila willistoni R2 complete consensus sequence.

Format: TXT Size: 4KB Download fileOpen Data

Additional data file 8. Drosophila yakuba R2 complete consensus sequence.

Format: TXT Size: 4KB Download fileOpen Data

Additional data file 9. Drosophila ananassae R1A complete consensus sequence.

Format: TXT Size: 6KB Download fileOpen Data

Additional data file 10. Drosophila ananassae R1B complete consensus sequence.

Format: TXT Size: 6KB Download fileOpen Data

Additional data file 11. Drosophila erecta R1 complete consensus sequence.

Format: TXT Size: 5KB Download fileOpen Data

Additional data file 12. Drosophila grimshawi R1 complete consensus sequence.

Format: TXT Size: 6KB Download fileOpen Data

Additional data file 13. Drosophila mojavensis R1 complete consensus sequence.

Format: TXT Size: 6KB Download fileOpen Data

Additional data file 14. Drosophila melanogaster R1 complete consensus sequence.

Format: TXT Size: 5KB Download fileOpen Data

Additional data file 15. Drosophila persimilis R1 complete consensus sequence.

Format: TXT Size: 5KB Download fileOpen Data

Additional data file 16. Drosophila pseudoobscura R1 complete consensus sequence.

Format: TXT Size: 5KB Download fileOpen Data

Additional data file 17. Drosophila sechellia R1 complete consensus sequence.

Format: TXT Size: 5KB Download fileOpen Data

Additional data file 18. Drosophila simulans R1 complete consensus sequence.

Format: TXT Size: 5KB Download fileOpen Data

Additional data file 19. Drosophila virilis R1 complete consensus sequence.

Format: TXT Size: 5KB Download fileOpen Data

Additional data file 20. Drosophila willistoni R1 complete consensussequence.

Format: TXT Size: 6KB Download fileOpen Data

Additional data file 21. Drosophila yakuba R1 complete sequence.

Format: TXT Size: 6KB Download fileOpen Data

Additional data file 22. Drosophila grimshawi R1.2 complete consensus sequence.

Format: TXT Size: 6KB Download fileOpen Data

Additional data file 23. Drosophila willistoni R2.2 complete consensus sequence.

Format: TXT Size: 4KB Download fileOpen Data

Acknowledgements

We thank Danna Eickbush for comments on the manuscript. This research was funded by National Science Foundation grant (MCB-0544071) and National Institutes of Health grant (GM42790).

References

  1. Volff JN: Turning junk into gold: domestication of transposable elements and the creation of new genes in eukaryotes.

    Bioessays 2006, 28:913-922. PubMed Abstract | Publisher Full Text OpenURL

  2. Hedges DJ, Deininger PL: Inviting instability: Transposable elements, double-strand breaks, and the maintenance of genome integrity.

    Mutat Res 2007, 616:46-59. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  3. Long EO, Dawid IB: Repeated genes in eukaryotes.

    Annu Rev Biochem 1980, 49:727-764. PubMed Abstract | Publisher Full Text OpenURL

  4. Eickbush TH, Eickbush DG: Finely orchestrated movements: evolution of the ribosomal RNA genes.

    Genetics 2007, 175:477-485. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  5. Eickbush TH: R2 and related site-specific non-long terminal repeat retrotransposons. In Mobile DNA II. Edited by Craig NL, Craigie R, Gellart M, Lambowitz AM. Washington DC: American Society of Microbiology; 2002:813-835. OpenURL

  6. Burke WD, Malik HS, Lathe WC III, Eickbush TH: Are retrotransposons long-term hitchhikers?.

    Nature 1998, 392:141-142. PubMed Abstract | Publisher Full Text OpenURL

  7. Malik HS, Burke WD, Eickbush TH: The age and evolution of non-LTR retrotransposable elements.

    Mol Biol Evol 1999, 16:793-805. PubMed Abstract | Publisher Full Text OpenURL

  8. Kojima KK, Fujiwara H: Cross-genome screening of novel sequence-specific non-LTR retrotransposons: various multicopy RNA genes and satellites are selected as targets.

    Mol Biol Evol 2004, 21:207-217. PubMed Abstract | Publisher Full Text OpenURL

  9. Kojima KK, Kuma K, Toh H, Fujiwara H: Identification of rDNA-specific non-LTR retrotransposons in Cnidaria.

    Mol Evol Biol 2006, 23:1984-1993. PubMed Abstract | Publisher Full Text OpenURL

  10. Luan DD, Korman MH, Jakubczak JL, Eickbush TH: Reverse transcription of R2Bm RNA is primed by a nick at the chromosomal target site: a mechanism for non-LTR retrotransposition.

    Cell 1993, 72:595-605. PubMed Abstract | Publisher Full Text OpenURL

  11. Christensen SM, Ye J, Eickbush TH: RNA from the 5' end of the R2 retrotransposon controls R2 protein binding to and cleavage of its DNA target.

    Proc Natl Acad Sci USA 2006, 103:17602-17607. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  12. Feng Q, Schumann G, Boeke JD: Retrotransposon R1Bm endonuclease cleaves the target sequence.

    Proc Natl Acad Sci USA 1998, 95:2083-2088. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  13. Maita N, Aoyagi H, Osani M, Shirakawa M, Fujiwara H: Characterization of the sequence specificity of the R1Bm endonuclease domain by structural and biochemical studies.

    Nucleic Acids Res 2007, 35:3918-3927. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  14. Ostertag EM, Kazazian HH: Twin priming: A proposed mechanism for the creation of inversions in L1 retrotransposition.

    Genome Res 2001, 11:2059-2065. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  15. Arnheim N, Krystal M, Schmickel R, Wilson W, Ryder O, Zimmer E: Molecular evidence for genetic exchange among ribosomal genes on nonhomologous chromosomes in man and apes.

    Proc Natl Acad Sci USA 1980, 77:7323-7327. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  16. Gonzalez IL, Sylvester JE: Human rDNA: evolutionary patterns within the genes and tandem arrays derived from multiple chromosomes.

    Genomics 2001, 73:255-263. PubMed Abstract | Publisher Full Text OpenURL

  17. Ganley AR, Kobayashi T: Highly efficient concerted evolution in the ribosomal DNA repeats: Total DNA repeat variation revealed by whole-genome shotgun sequence data.

    Genome Res 2007, 17:184-191. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  18. Stage DE, Eickbush TH: Sequence variation within the rRNA gene loci of 12 Drosophila species.

    Genome Res 2007, 17:1888-1897. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  19. Jakubczak JL, Burke WD, Eickbush TH: Retrotransposable elements R1 and R2 interrupt the rRNA genes of most insects.

    Proc Natl Acad Sci USA 1991, 88:3295-3299. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  20. Eickbush DG, Eickbush TH: Transcription of endogenous and exogenous R2 elements in the rRNA gene locus of Drosophila melanogaster.

    Mol Cell Biol 2003, 23:3825-3836. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  21. Eickbush TH, Burke WD, Eickbush DG, Lathe WC III: Evolution of R1 and R2 in the rDNA units of the genus Drosophila.

    Genetica 1997, 100:49-61. PubMed Abstract | Publisher Full Text OpenURL

  22. Burke WD, Eickbush DG, Xiong Y, Jakubczak J, Eickbush TH: Sequence relationship of retrotransposable elements R1 and R2 within and between divergent insect species.

    Mol Biol Evol 1993, 10:163-185. PubMed Abstract | Publisher Full Text OpenURL

  23. Clark AG, Eisen MB, Smith DR, Bergman CM, Oliver B, Markow TA, Kaufman TC, Kellis M, Gelbart W, Iyer VN, Pollard DA, Sackton TB, Larracuente AM, Singh ND, Abad JP, Abt DN, Adryan B, Aguade M, Akashi H, Anderson WW, Aquadro CF, Ardell DH, Arguello R, Artieri CG, Barbash DA, Barker D, Barsanti P, Batterham P, Batzoglou S, Begun D, et al.: Evolution of genes and genomes on the Drosophila phylogeny.

    Nature 2007, 450:203-218. PubMed Abstract | Publisher Full Text OpenURL

  24. Jakubczak JL, Xiong Y, Eickbush TH: Type I (R1) and Type II (R2) ribosomal DNA insertions of Drosophila melanogaster are retrotransposable elements closely related to those of Bombyx mori.

    J Mol Biol 1990, 212:37-52. PubMed Abstract | Publisher Full Text OpenURL

  25. Lathe WC III, Eickbush TH: A single lineage of R2 retrotransposable elements is an active evolutionarily stable component of the Drosophila rDNA locus.

    Mol Biol Evol 1997, 14:1232-1241. PubMed Abstract | Publisher Full Text OpenURL

  26. Eickbush DG, Eickbush TH: Vertical transmission of the retrotransposable elements R1 and R2 during the evolution of the Drosophila melanogaster species subgroup.

    Genetics 1995, 139:671-684. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  27. Kaminker JS, Bergman CM, Kronmiller B, Carlson J, Svirskas R, Patel S, Frise E, Wheeler DA, Lewis SE, Rubin GM, Ashburner M, Celniker SE: The transposable elements of the Drosophila melanogaster euchromatin: a genomics perspective.

    Genome Biol 2002, 3:RESEARCH0084. PubMed Abstract | BioMed Central Full Text | PubMed Central Full Text OpenURL

  28. Gentile KL, Burke WD, Eickbush TH: Multiple lineages of R1 retrotransposable elements can coexist in the rDNA loci of Drosophila.

    Mol Biol Evol 2001, 18:235-245. PubMed Abstract | Publisher Full Text OpenURL

  29. Busseau I, Berezikov E, Bucheton A: Identification of Waldo-A and Waldo-B, two closely related non-LTR retrotransposons in Drosophila.

    Mol Biol Evol 2001, 18:196-205. PubMed Abstract | Publisher Full Text OpenURL

  30. Haas NB, Grabowski JM, North J, Moran JV, Burch JB: Subfamilies of CR1 non-LTR retrotransposons have different 5' UTR sequences but are otherwise conserved.

    Gene 2001, 265:175-183. PubMed Abstract | Publisher Full Text OpenURL

  31. Besansky NJ: A retrotransposable element from the mosquito Anopheles gambiae.

    Mol Cell Biol 1990, 10:863-871. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  32. George JA, Eickbush TH: Conserved features at the 5' end of Drosophila R2 retrotransposable elements: implications for transcription and translation.

    Insect Mol Biol 1999, 8:3-10. PubMed Abstract | Publisher Full Text OpenURL

  33. Eickbush DG, Ye J, Zhang X, Burke WD, Eickbush TH: Epigenetic regulation of retrotransposons within the nucleolus of Drosophila.

    Mol Cell Biol 2008, 28:6452-6461. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  34. Hey J, Kliman RM: Population genetics and phylogenetics of DNA sequence variation at multiple loci within the Drosophila melanogaster species complex.

    Mol Biol Evol 1993, 10:804-822. PubMed Abstract | Publisher Full Text OpenURL

  35. Kojima KK, Fujiwara H: Long-term inheritance of the 28S rDNA-specific retrotransposon R2.

    Mol Biol Evol 2005, 22:2157-2165. PubMed Abstract | Publisher Full Text OpenURL

  36. George JA, Burke WD, Eickbush TH: Analysis of the 5' junctions of R2 insertions with the 28S gene: implications for non-LTR retrotransposition.

    Genetics 1996, 142:853-863. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  37. Burke WD, Malik HS, Jones JP, Eickbush TH: The domain structure and retrotransposition mechanism of R2 elements are conserved throughout arthropods.

    Mol Biol Evol 1999, 16:502-511. PubMed Abstract | Publisher Full Text OpenURL

  38. Luan DD, Eickbush TH: RNA template requirements for target DNA-primed reverse transcription by the R2 retrotransposable element.

    Mol Cell Biol 1995, 15:3882-3891. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  39. Bibillo A, Eickbush TH: End-to-end template jumping by the reverse transcriptase encoded by the R2 retrotransposon.

    J Biol Chem 2004, 279:14945-14953. PubMed Abstract | Publisher Full Text OpenURL

  40. Varricchio P, Gargiulo G, Graziani F, Manzi A, Pennacchio F, Digilio M, Tremblay E, Malva C: Characterization of Aphidius ervi (Hymenoptera, Braconidae) ribosomal genes and identification of site-specific insertion elements belonging to the non-LTR retrotransposon family.

    Insect Biochem Mol Biol 1995, 25:603-612. PubMed Abstract | Publisher Full Text OpenURL

  41. Xiong Y, Eickbush TH: Functional expression of a sequence-specific endonuclease encoded by the retrotransposon R2Bm.

    Cell 1988, 55:235-246. PubMed Abstract | Publisher Full Text OpenURL

  42. Rae PM: Unequal crossing-over accounts for the organization of Drosophila virilis rDNA insertions and the integrity of flanking 28S gene.

    Nature 1982, 296:579-581. PubMed Abstract | Publisher Full Text OpenURL

  43. Osani-Futahashi M, Suetsugu Y, Mita K, Fujiwara H: Genome-wide screening and characterization of transposable elements and their distribution analysis in the silkworm, Bombyx mori.

    Insect Biochem Mol Biol 2008, 38:1046-1057. PubMed Abstract | Publisher Full Text OpenURL

  44. Pérez-González CE, Eickbush TH: Dynamics of R1 and R2 elements in the rDNA locus of Drosophila simulans.

    Genetics 2001, 158:1557-1567. PubMed Abstract | PubMed Central Full Text OpenURL

  45. Zhou J, Eickbush TH: The pattern of R2 retrotransposon activity in natural populations of Drosophila simulans reflects the dynamic nature of the rDNA locus.

    PLoS Genet 2009, 5:e1000386. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  46. Pérez-González CE, Eickbush TH: Rates of R1 and R2 retrotransposition and elimination from the rDNA locus of Drosophila melanogaster.

    Genetics 2002, 162:799-811. PubMed Abstract | PubMed Central Full Text OpenURL

  47. Zhang X, Eickbush TH: Characterization of active R2 retrotransposition in the rDNA locus of Drosophila simulans.

    Genetics 2005, 170:195-200. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  48. Malik HS, Eickbush TH: Retrotransposable elements R1 and R2 in the rDNAunits of Drosophila mercatorum: abnormal abdomen revisited.

    Genetics 1999, 151:653-665. PubMed Abstract | PubMed Central Full Text OpenURL

  49. Luan DD, Eickbush TH: Downstream 28S gene sequences on the RNA template affect the choice of primer and the accuracy of initiation by the reverse transcriptase.

    Mol Cell Biol 1996, 16:4726-4734. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  50. Kurzynska-Kokorniak A, Jamburuthugoda VK, Bibillo A, Eickbush TH: DNA-directed DNA polymerase and strand displacement activity of the reverse transcriptase encoded by the R2 retrotransposon.

    J Mol Biol 2007, 374:322-333. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  51. NCBI BLAST. [http://www.ncbi.nlm.nih.gov/BLAST/] webcite

  52. Thompson JD, Gibson TJ, Plewniak F, Jeanmougin F, Higgins DG: The CLUSTAL_X windows interface: Flexible strategies for multiple sequence alignment aided by quality analysis tool.

    Nucleic Acids Res 1997, 25:4876-4882. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  53. Eickbush Lab Website. [http://www.rochester.edu/college/BIO/labs/thelab/] webcite

  54. Clamp M, Cuff J, Searle SM, Barton GJ: The Jalview Java alignment editor.

    Bioinformatics 2004, 20:426-427. PubMed Abstract | Publisher Full Text OpenURL

  55. Guindon S, Gascuel O: A simple, fast, and accurate algorithm to estimate large phylogenies by maximum likelihood.

    Syst Biol 2003, 52:696-704. PubMed Abstract | Publisher Full Text OpenURL

  56. LIRMM. [http://www.phylogeny.fr] webcite

  57. Dereeper A, Guignon V, Blanc G, Audic S, Buffet S, Chevenet F, Dufayard JF, Guindon S, Lefort V, Lescot M, Claverie JM, Gascuel O: Phylogeny.fr: robust phylogenetic analysis for the non-specialist.

    Nucleic Acids Res 2008, 36:W465-469. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  58. Chevenet F, Brun C, Bañuls AL, Jacq B, Christen R: TreeDyn: towards dynamic graphics and annotations for analyses of trees.

    BMC Bioinformatics 2006, 7:439. PubMed Abstract | BioMed Central Full Text | PubMed Central Full Text OpenURL

  59. Anisimova M, Gascuel O: Approximate likelihood-ratio test for branches: A fast, accurate, and powerful alternative.

    Syst Biol 2006, 55:539-552. PubMed Abstract | Publisher Full Text OpenURL

  60. Sequence Manipulation Suite: Ident and Sim. [http://www.ualberta.ca/~stothard/javascript/ident_sim.html] webcite

  61. Pond SLK, Frost SDW: Datamonkey: rapid detection of selective pressure on individual sites of codon alignments.

    Bioinformatics 2005, 21:2531-2533. PubMed Abstract | Publisher Full Text OpenURL

  62. Scheffler K, Martin DP, Seoighe C: Robust inference of positive selection from recombining coding sequences.

    Bioinformatics 2006, 22:2493-2499. PubMed Abstract | Publisher Full Text OpenURL